18 Clinical Trials for Various Conditions
This study is being conducted to gather medium and long-term information regarding the performance and safety of the commercially available DURALOC® Option Ceramic-on-Ceramic Hip Prosthesis System.
The purpose of this study is to compare the performance of artificial hips with metal heads and metal sockets to artificial hips with ceramic heads articulating with metal socket components. The success of the total hip arthroplasty (THA) will be based upon all of the following clinical and radiographic criteria being met at the two-year evaluation: (1) the patient's clinical results as measured using modified Harris Hip evaluation rating system, and the absence of a complication that requires the surgical removal or replacement of a component; and (2) radiographic findings at study endpoint (i.e., two years follow-up). Clinical and radiographic success at two (2) years postoperative is required for the study hip to be deemed successful.
The purpose of this study is to evaluate the success rate of cementless primary hip replacement with the Restoration® ADM X3® Acetabular System as compared to other primary hip systems in the literature, through absence of femoral head dislocation at 10 years postoperative.
The objective of this retrospective enrollment/prospective follow-up consecutive series PMCF study is to collect data confirming safety, performance, and clinical benefits of the Longevity IT Oblique and Offset liners when used for primary or revision total hip arthroplasty (implants and instrumentation) at a minimum of 10-year follow-up.
This clinical study will evaluate the early to midterm safety and performance of the JOURNEY™ II UNI UKS in patients with non-inflammatory degenerative joint disease of the knee requiring lateral or medial knee compartment replacement. Clinical, radiographic, health economic and safety outcomes will be evaluated.
This is a retrospective/prospective, open-label single cohort, multicenter study to collect relevant clinical data from 147 subjects with unicompartmental degeneration of the knee in whom the Journey UNI UKS was previously implanted.
This study is intended to gather short (Pre-operative to 4-years) and mid-term (5-years) information regarding the performance and safety of the commercially available 36mm CERAMAX® Ceramic on Ceramic Total Hip System from a cohort of new study subjects that were not previously involved in the IDE study for this device.
This study is intended to gather medium (5- to 7-years) and long-term (minimum 8- to 10-years) information regarding the performance and safety of the commercially available 36mm CERAMAX® Ceramic on Ceramic (COC) Total Hip System from a cohort of study subjects that were previously enrolled in the IDE study. (COC = 36mm ceramic acetabular bearing insert component that articulates with a ceramic femoral head in the COC total hip replacement system)
This study is intended to gather medium (0-5 years) and long-term (6-10 years) information regarding the performance and safety of the commercially available Ceramax™ Ceramic on Ceramic Total Hip System. This is a two-phased study consisting of a clinical follow-up phase and a clinical outcomes phase. In Phase One (0-5 years), diagnostic, demographic and operative information will be gathered for each subject enrolled in this study. In addition, Harris Hip Evaluations, subjective evaluations and radiographs will be completed annually. In Phase Two (6 - 10 years), a subjective outcomes questionnaire and a SF-12 Health Survey will be mailed to subjects annually.
The primary objective of this investigation is to evaluate survivorship at ten years. For this post approval study (PAS), a maximum acceptable hazard of revision is assumed to be a constant 1% per year.
This is a multi-center, randomized study to compare blood and urine cobalt, chromium, and titanium ion levels of a metal-on-metal articular bearing coupled with two different head sizes to that of a conventional metal-on-polyethylene bearing.
This study is a supplement to the 28 mm Ceramic-on-Ceramic study which was designed to evaluate artificial hips with a 28 mm ceramic head and liner to determine whether they perform as well as artificial hips with a 28 mm ceramic head and a polyethylene liner. This arm of the study is designed to compare a 36 mm ceramic head and sleeve with a subset of the control (28mm ceramic head and a polyethylene sleeve) from the original study (G030075) (NCT#00208507) with additional follow-up, to determine if they perform as well.
The primary objective of this investigation is to evaluate the clinical and radiographic outcomes of the ASR™-XL Acetabular Cup System compared to the Pinnacle™ Acetabular Cup with a 28mm or 36mm ULTAMET™ metal insert.
The primary purpose of this study is to evaluate the clinical and radiographic performance of the G7 Acetabular Cup System.
This post-marketing investigation will evaluate the long term (up to 15 years) survivorship of the Attune Primary Knee Prosthesis in patients with non-inflammatory degenerative joint disease. Data from Subjects who receive one of four knee configurations will be pooled to establish a contemporary dataset.
The study is designed to evaluate artificial hips with a 28 mm ceramic head and a ceramic liner to determine whether they perform as well as artificial hips with a 28 mm ceramic head and a polyethylene liner.
The primary objective of this study is to obtain implant survivorship and clinical outcomes data for the commercially available Persona Partial Knee System.
R3 Delta Post-Approval Study U.S.